Self-aligning ball bearings · Designation: 1214 ETN9
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 70 |
| D | 125 |
| B | 24 |
| Dynamic | 35.8 |
| Static | 14.6 |
| Load limit | 0.75 |
| Reference speed | 11000 |
| Limiting speed | 7000 |
| Mass | 1.25 |
| r1,2 | 1.5 |
| da min | 79 |
| da max | – |
| Da max | 116 |
| ra max | 1.5 |
| kr | 0.04 |
| b | – |
| D1, D2 | 107 |
| d1, d2 | 87.4 |
| C1 | – |
| K | – |
| e | 0.18 |
| Y1 | 3.5 |
| Y2 | 5.4 |
| Y0 | 3.6 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 70 |
| D | 125 |
| B | 24 |
| Dynamic | 35.8 |
| Static | 14.6 |
| Load limit | 0.75 |
| Reference speed | 11000 |
| Limiting speed | 7000 |
| Mass | 1.25 |
| r1,2 | 1.5 |
| da min | 79 |
| da max | – |
| Da max | 116 |
| ra max | 1.5 |
| kr | 0.04 |
| b | – |
| D1, D2 | 107 |
| d1, d2 | 87.4 |
| C1 | – |
| K | – |
| e | 0.18 |
| Y1 | 3.5 |
| Y2 | 5.4 |
| Y0 | 3.6 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 1214 ETN9.