Self-aligning ball bearings · Designation: 13030
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 150 |
| D | 225 |
| B | 56 |
| Dynamic | 57.2 |
| Static | 23.6 |
| Load limit | 0.88 |
| Reference speed | 5600 |
| Limiting speed | 3400 |
| Mass | 7.5 |
| r1,2 | 2.1 |
| da min | 161 |
| da max | – |
| Da max | 214 |
| ra max | 2 |
| kr | 0.02 |
| b | 8.3 |
| D1, D2 | 204 |
| d1, d2 | 175 |
| C1 | – |
| K | 4.5 |
| e | 0.24 |
| Y1 | 2.6 |
| Y2 | 4.1 |
| Y0 | 2.8 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 150 |
| D | 225 |
| B | 56 |
| Dynamic | 57.2 |
| Static | 23.6 |
| Load limit | 0.88 |
| Reference speed | 5600 |
| Limiting speed | 3400 |
| Mass | 7.5 |
| r1,2 | 2.1 |
| da min | 161 |
| da max | – |
| Da max | 214 |
| ra max | 2 |
| kr | 0.02 |
| b | 8.3 |
| D1, D2 | 204 |
| d1, d2 | 175 |
| C1 | – |
| K | 4.5 |
| e | 0.24 |
| Y1 | 2.6 |
| Y2 | 4.1 |
| Y0 | 2.8 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 13030.