Self-aligning ball bearings · Designation: 1311 ETN9
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 55 |
| D | 120 |
| B | 29 |
| Dynamic | 50.7 |
| Static | 18 |
| Load limit | 0.92 |
| Reference speed | 11000 |
| Limiting speed | 7500 |
| Mass | 1.6 |
| r1,2 | 2 |
| da min | 66 |
| da max | – |
| Da max | 109 |
| ra max | 2 |
| kr | 0.04 |
| b | – |
| D1, D2 | 102 |
| d1, d2 | 77.9 |
| C1 | – |
| K | – |
| e | 0.23 |
| Y1 | 2.7 |
| Y2 | 4.2 |
| Y0 | 2.8 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 55 |
| D | 120 |
| B | 29 |
| Dynamic | 50.7 |
| Static | 18 |
| Load limit | 0.92 |
| Reference speed | 11000 |
| Limiting speed | 7500 |
| Mass | 1.6 |
| r1,2 | 2 |
| da min | 66 |
| da max | – |
| Da max | 109 |
| ra max | 2 |
| kr | 0.04 |
| b | – |
| D1, D2 | 102 |
| d1, d2 | 77.9 |
| C1 | – |
| K | – |
| e | 0.23 |
| Y1 | 2.7 |
| Y2 | 4.2 |
| Y0 | 2.8 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 1311 ETN9.