Single row deep groove ball bearings · Designation: 16010
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 10 |
| Dynamic | 16.8 |
| Static | 11.4 |
| Load limit | 0.56 |
| Reference speed | 18000 |
| Limiting speed | 11000 |
| Mass | 0.18 |
| d1 | 60 |
| d2 | – |
| D1 | 70 |
| D2 | – |
| r1,2 | 0.6 |
| da min | 54 |
| da max | – |
| Da max | 76 |
| ra max | 0.6 |
| kr | 0.02 |
| f0 | 14 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 10 |
| Dynamic | 16.8 |
| Static | 11.4 |
| Load limit | 0.56 |
| Reference speed | 18000 |
| Limiting speed | 11000 |
| Mass | 0.18 |
| d1 | 60 |
| d2 | – |
| D1 | 70 |
| D2 | – |
| r1,2 | 0.6 |
| da min | 54 |
| da max | – |
| Da max | 76 |
| ra max | 0.6 |
| kr | 0.02 |
| f0 | 14 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 16010.