Self-aligning ball bearings · Designation: 2302
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 15 |
| D | 42 |
| B | 17 |
| Dynamic | 11.9 |
| Static | 2.9 |
| Load limit | 0.15 |
| Reference speed | 32000 |
| Limiting speed | 24000 |
| Mass | 0.12 |
| r1,2 | 1 |
| da min | 20.6 |
| da max | – |
| Da max | 36.4 |
| ra max | 1 |
| kr | 0.05 |
| b | – |
| D1, D2 | 33.3 |
| d1, d2 | 23.1 |
| C1 | – |
| K | – |
| e | 0.52 |
| Y1 | 1.2 |
| Y2 | 1.9 |
| Y0 | 1.3 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 15 |
| D | 42 |
| B | 17 |
| Dynamic | 11.9 |
| Static | 2.9 |
| Load limit | 0.15 |
| Reference speed | 32000 |
| Limiting speed | 24000 |
| Mass | 0.12 |
| r1,2 | 1 |
| da min | 20.6 |
| da max | – |
| Da max | 36.4 |
| ra max | 1 |
| kr | 0.05 |
| b | – |
| D1, D2 | 33.3 |
| d1, d2 | 23.1 |
| C1 | – |
| K | – |
| e | 0.52 |
| Y1 | 1.2 |
| Y2 | 1.9 |
| Y0 | 1.3 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 2302.