Self-aligning ball bearings · Designation: 2306 K
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 30 |
| D | 72 |
| B | 27 |
| Dynamic | 31.2 |
| Static | 8.8 |
| Load limit | 0.45 |
| Reference speed | 18000 |
| Limiting speed | 13000 |
| Mass | 0.5 |
| r1,2 | 1.1 |
| da min | 37 |
| da max | – |
| Da max | 65 |
| ra max | 1.1 |
| kr | 0.05 |
| b | – |
| D1, D2 | 59.8 |
| d1, d2 | 41.9 |
| C1 | – |
| K | – |
| e | 0.44 |
| Y1 | 1.4 |
| Y2 | 2.2 |
| Y0 | 1.4 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 30 |
| D | 72 |
| B | 27 |
| Dynamic | 31.2 |
| Static | 8.8 |
| Load limit | 0.45 |
| Reference speed | 18000 |
| Limiting speed | 13000 |
| Mass | 0.5 |
| r1,2 | 1.1 |
| da min | 37 |
| da max | – |
| Da max | 65 |
| ra max | 1.1 |
| kr | 0.05 |
| b | – |
| D1, D2 | 59.8 |
| d1, d2 | 41.9 |
| C1 | – |
| K | – |
| e | 0.44 |
| Y1 | 1.4 |
| Y2 | 2.2 |
| Y0 | 1.4 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 2306 K.