Self-aligning ball bearings · Designation: 2310
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 50 |
| D | 110 |
| B | 40 |
| Dynamic | 63.7 |
| Static | 20 |
| Load limit | 1.04 |
| Reference speed | 14000 |
| Limiting speed | 9500 |
| Mass | 1.65 |
| r1,2 | 2 |
| da min | 61 |
| da max | – |
| Da max | 99 |
| ra max | 2 |
| kr | 0.05 |
| b | – |
| D1, D2 | 92.5 |
| d1, d2 | 66 |
| C1 | – |
| K | – |
| e | 0.43 |
| Y1 | 1.5 |
| Y2 | 2.3 |
| Y0 | 1.6 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 50 |
| D | 110 |
| B | 40 |
| Dynamic | 63.7 |
| Static | 20 |
| Load limit | 1.04 |
| Reference speed | 14000 |
| Limiting speed | 9500 |
| Mass | 1.65 |
| r1,2 | 2 |
| da min | 61 |
| da max | – |
| Da max | 99 |
| ra max | 2 |
| kr | 0.05 |
| b | – |
| D1, D2 | 92.5 |
| d1, d2 | 66 |
| C1 | – |
| K | – |
| e | 0.43 |
| Y1 | 1.5 |
| Y2 | 2.3 |
| Y0 | 1.6 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 2310.