Self-aligning ball bearings · Designation: 2316 K
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 80 |
| D | 170 |
| B | 58 |
| Dynamic | 135 |
| Static | 49 |
| Load limit | 2.24 |
| Reference speed | 7000 |
| Limiting speed | 5300 |
| Mass | 6.1 |
| r1,2 | 2.1 |
| da min | 92 |
| da max | – |
| Da max | 158 |
| ra max | 2 |
| kr | 0.05 |
| b | – |
| D1, D2 | 146 |
| d1, d2 | 104 |
| C1 | – |
| K | – |
| e | 0.37 |
| Y1 | 1.7 |
| Y2 | 2.6 |
| Y0 | 1.8 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 80 |
| D | 170 |
| B | 58 |
| Dynamic | 135 |
| Static | 49 |
| Load limit | 2.24 |
| Reference speed | 7000 |
| Limiting speed | 5300 |
| Mass | 6.1 |
| r1,2 | 2.1 |
| da min | 92 |
| da max | – |
| Da max | 158 |
| ra max | 2 |
| kr | 0.05 |
| b | – |
| D1, D2 | 146 |
| d1, d2 | 104 |
| C1 | – |
| K | – |
| e | 0.37 |
| Y1 | 1.7 |
| Y2 | 2.6 |
| Y0 | 1.8 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 2316 K.