Self-aligning ball bearings · Designation: 2318 K
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 90 |
| D | 190 |
| B | 64 |
| Dynamic | 151 |
| Static | 57 |
| Load limit | 2.5 |
| Reference speed | 6300 |
| Limiting speed | 4500 |
| Mass | 8.45 |
| r1,2 | 3 |
| da min | 104 |
| da max | – |
| Da max | 176 |
| ra max | 3 |
| kr | 0.05 |
| b | – |
| D1, D2 | 163 |
| d1, d2 | 121 |
| C1 | – |
| K | – |
| e | 0.37 |
| Y1 | 1.7 |
| Y2 | 2.6 |
| Y0 | 1.8 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings
| Parameter | Value |
|---|---|
| d | 90 |
| D | 190 |
| B | 64 |
| Dynamic | 151 |
| Static | 57 |
| Load limit | 2.5 |
| Reference speed | 6300 |
| Limiting speed | 4500 |
| Mass | 8.45 |
| r1,2 | 3 |
| da min | 104 |
| da max | – |
| Da max | 176 |
| ra max | 3 |
| kr | 0.05 |
| b | – |
| D1, D2 | 163 |
| d1, d2 | 121 |
| C1 | – |
| K | – |
| e | 0.37 |
| Y1 | 1.7 |
| Y2 | 2.6 |
| Y0 | 1.8 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 2318 K.