Single row deep groove ball bearings · Designation: 60/710 MA
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 710 |
| D | 1030 |
| B | 140 |
| Dynamic | 956 |
| Static | 2200 |
| Load limit | 31.5 |
| Reference speed | 1000 |
| Limiting speed | 850 |
| Mass | 382 |
| d1 | 811 |
| d2 | – |
| D1 | 928 |
| D2 | – |
| r1,2 | 7.5 |
| da min | 738 |
| da max | – |
| Da max | 1002 |
| ra max | 6 |
| kr | 0.025 |
| f0 | 16 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 710 |
| D | 1030 |
| B | 140 |
| Dynamic | 956 |
| Static | 2200 |
| Load limit | 31.5 |
| Reference speed | 1000 |
| Limiting speed | 850 |
| Mass | 382 |
| d1 | 811 |
| d2 | – |
| D1 | 928 |
| D2 | – |
| r1,2 | 7.5 |
| da min | 738 |
| da max | – |
| Da max | 1002 |
| ra max | 6 |
| kr | 0.025 |
| f0 | 16 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 60/710 MA.