Single row deep groove ball bearings · Designation: 61808
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 40 |
| D | 52 |
| B | 7 |
| Dynamic | 4.49 |
| Static | 3.75 |
| Load limit | 0.16 |
| Reference speed | 26000 |
| Limiting speed | 16000 |
| Mass | 0.032 |
| d1 | 43.2 |
| d2 | – |
| D1 | 48.1 |
| D2 | – |
| r1,2 | 0.3 |
| da min | 42 |
| da max | – |
| Da max | 50 |
| ra max | 0.3 |
| kr | 0.015 |
| f0 | 15 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 40 |
| D | 52 |
| B | 7 |
| Dynamic | 4.49 |
| Static | 3.75 |
| Load limit | 0.16 |
| Reference speed | 26000 |
| Limiting speed | 16000 |
| Mass | 0.032 |
| d1 | 43.2 |
| d2 | – |
| D1 | 48.1 |
| D2 | – |
| r1,2 | 0.3 |
| da min | 42 |
| da max | – |
| Da max | 50 |
| ra max | 0.3 |
| kr | 0.015 |
| f0 | 15 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 61808.