Single row deep groove ball bearings · Designation: 619/4-2Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 4 |
| D | 11 |
| B | 4 |
| Dynamic | 0.624 |
| Static | 0.18 |
| Load limit | 0.008 |
| Reference speed | 130000 |
| Limiting speed | 63000 |
| Mass | 0.0017 |
| d1 | 6.1 |
| d2 | – |
| D1 | – |
| D2 | 9.9 |
| r1,2 | 0.15 |
| da min | 4.8 |
| da max | 5.8 |
| Da max | 10.2 |
| ra max | 0.1 |
| kr | 0.02 |
| f0 | 6.4 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 4 |
| D | 11 |
| B | 4 |
| Dynamic | 0.624 |
| Static | 0.18 |
| Load limit | 0.008 |
| Reference speed | 130000 |
| Limiting speed | 63000 |
| Mass | 0.0017 |
| d1 | 6.1 |
| d2 | – |
| D1 | – |
| D2 | 9.9 |
| r1,2 | 0.15 |
| da min | 4.8 |
| da max | 5.8 |
| Da max | 10.2 |
| ra max | 0.1 |
| kr | 0.02 |
| f0 | 6.4 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 619/4-2Z.