Single row deep groove ball bearings · Designation: 628/7-2Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 7 |
| D | 14 |
| B | 5 |
| Dynamic | 0.956 |
| Static | 0.4 |
| Load limit | 0.017 |
| Reference speed | 100000 |
| Limiting speed | 50000 |
| Mass | 0.0031 |
| d1 | – |
| d2 | 8.5 |
| D1 | – |
| D2 | 12.7 |
| r1,2 | 0.15 |
| da min | 7.8 |
| da max | 8 |
| Da max | 13.2 |
| ra max | 0.1 |
| kr | 0.015 |
| f0 | 11 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 7 |
| D | 14 |
| B | 5 |
| Dynamic | 0.956 |
| Static | 0.4 |
| Load limit | 0.017 |
| Reference speed | 100000 |
| Limiting speed | 50000 |
| Mass | 0.0031 |
| d1 | – |
| d2 | 8.5 |
| D1 | – |
| D2 | 12.7 |
| r1,2 | 0.15 |
| da min | 7.8 |
| da max | 8 |
| Da max | 13.2 |
| ra max | 0.1 |
| kr | 0.015 |
| f0 | 11 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 628/7-2Z.