Single row deep groove ball bearings · Designation: 635-Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 5 |
| D | 19 |
| B | 6 |
| Dynamic | 2.34 |
| Static | 0.95 |
| Load limit | 0.04 |
| Reference speed | 80000 |
| Limiting speed | 40000 |
| Mass | 0.0093 |
| d1 | 11.1 |
| d2 | – |
| D1 | – |
| D2 | 16.5 |
| r1,2 | 0.3 |
| da min | 7.4 |
| da max | 10.6 |
| Da max | 16.6 |
| ra max | 0.3 |
| kr | 0.03 |
| f0 | 13 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 5 |
| D | 19 |
| B | 6 |
| Dynamic | 2.34 |
| Static | 0.95 |
| Load limit | 0.04 |
| Reference speed | 80000 |
| Limiting speed | 40000 |
| Mass | 0.0093 |
| d1 | 11.1 |
| d2 | – |
| D1 | – |
| D2 | 16.5 |
| r1,2 | 0.3 |
| da min | 7.4 |
| da max | 10.6 |
| Da max | 16.6 |
| ra max | 0.3 |
| kr | 0.03 |
| f0 | 13 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 635-Z.