Single row deep groove ball bearings · Designation: 6405
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 25 |
| D | 80 |
| B | 21 |
| Dynamic | 35.8 |
| Static | 19.3 |
| Load limit | 0.815 |
| Reference speed | 20000 |
| Limiting speed | 13000 |
| Mass | 0.54 |
| d1 | 45.4 |
| d2 | – |
| D1 | 62.9 |
| D2 | – |
| r1,2 | 1.5 |
| da min | 34 |
| da max | – |
| Da max | 71 |
| ra max | 1.5 |
| kr | 0.035 |
| f0 | 12 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 25 |
| D | 80 |
| B | 21 |
| Dynamic | 35.8 |
| Static | 19.3 |
| Load limit | 0.815 |
| Reference speed | 20000 |
| Limiting speed | 13000 |
| Mass | 0.54 |
| d1 | 45.4 |
| d2 | – |
| D1 | 62.9 |
| D2 | – |
| r1,2 | 1.5 |
| da min | 34 |
| da max | – |
| Da max | 71 |
| ra max | 1.5 |
| kr | 0.035 |
| f0 | 12 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 6405.