Single row deep groove ball bearings · Designation: 6410
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 50 |
| D | 130 |
| B | 31 |
| Dynamic | 87.1 |
| Static | 52 |
| Load limit | 2.2 |
| Reference speed | 12000 |
| Limiting speed | 7500 |
| Mass | 1.95 |
| d1 | 75.4 |
| d2 | – |
| D1 | 105 |
| D2 | – |
| r1,2 | 2.1 |
| da min | 64 |
| da max | – |
| Da max | 116 |
| ra max | 2 |
| kr | 0.035 |
| f0 | 12 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Single row deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 50 |
| D | 130 |
| B | 31 |
| Dynamic | 87.1 |
| Static | 52 |
| Load limit | 2.2 |
| Reference speed | 12000 |
| Limiting speed | 7500 |
| Mass | 1.95 |
| d1 | 75.4 |
| d2 | – |
| D1 | 105 |
| D2 | – |
| r1,2 | 2.1 |
| da min | 64 |
| da max | – |
| Da max | 116 |
| ra max | 2 |
| kr | 0.035 |
| f0 | 12 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 6410.