CARB toroidal roller bearings · Designation: C 4010 TN9
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 30 |
| Dynamic | 116 |
| Static | 140 |
| Load limit | 16.3 |
| Reference speed | 5600 |
| Limiting speed | 7500 |
| Mass | 0.55 |
| d2 | 57.6 |
| D1 | 70.8 |
| r1,2 | 1 |
| da min | 54.6 |
| da max | 57.6 |
| Da max | 75.4 |
| ra max | 1 |
| Da min | 69.7 |
| Ca min | 0.1 |
| s1 max | 6 |
| s2 max | – |
| k1 | 0.103 |
| k2 | 0.107 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
CARB toroidal roller bearings
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 30 |
| Dynamic | 116 |
| Static | 140 |
| Load limit | 16.3 |
| Reference speed | 5600 |
| Limiting speed | 7500 |
| Mass | 0.55 |
| d2 | 57.6 |
| D1 | 70.8 |
| r1,2 | 1 |
| da min | 54.6 |
| da max | 57.6 |
| Da max | 75.4 |
| ra max | 1 |
| Da min | 69.7 |
| Ca min | 0.1 |
| s1 max | 6 |
| s2 max | – |
| k1 | 0.103 |
| k2 | 0.107 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: C 4010 TN9.