CARB toroidal roller bearings · Designation: C 4030-2CS5V/GEM9
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 150 |
| D | 225 |
| B | 75 |
| Dynamic | 585 |
| Static | 965 |
| Load limit | 93 |
| Reference speed | – |
| Limiting speed | 63 |
| Mass | 10 |
| d2 | 175 |
| D1 | 204 |
| r1,2 | 2.1 |
| da min | 161 |
| da max | 174 |
| Da max | 214 |
| ra max | 2 |
| Da min | – |
| Ca min | – |
| s1 max | – |
| s2 max | 10.8 |
| k1 | 0.084 |
| k2 | 0.144 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
CARB toroidal roller bearings
| Parameter | Value |
|---|---|
| d | 150 |
| D | 225 |
| B | 75 |
| Dynamic | 585 |
| Static | 965 |
| Load limit | 93 |
| Reference speed | – |
| Limiting speed | 63 |
| Mass | 10 |
| d2 | 175 |
| D1 | 204 |
| r1,2 | 2.1 |
| da min | 161 |
| da max | 174 |
| Da max | 214 |
| ra max | 2 |
| Da min | – |
| Ca min | – |
| s1 max | – |
| s2 max | 10.8 |
| k1 | 0.084 |
| k2 | 0.144 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: C 4030-2CS5V/GEM9.