Drawn cup needle roller bearings · Designation: HK 0306 TN
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 6.5 |
| Dynamic | 1.23 |
| Static | 0.88 |
| Load limit | 0.088 |
| Reference speed | 24000 |
| Limiting speed | 26000 |
| Mass | 0.001 |
| C | 6 |
| Fw | 3 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| r min | 0.3 |
| Inner ring IR | – |
| Inner ring LR | – |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Drawn cup needle roller bearings
| Parameter | Value |
|---|---|
| D | 6.5 |
| Dynamic | 1.23 |
| Static | 0.88 |
| Load limit | 0.088 |
| Reference speed | 24000 |
| Limiting speed | 26000 |
| Mass | 0.001 |
| C | 6 |
| Fw | 3 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| r min | 0.3 |
| Inner ring IR | – |
| Inner ring LR | – |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: HK 0306 TN.