Support rollers without flange rings, with an inner ring · Designation: NA 2201.2RS
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 12 |
| D | 32 |
| B | 14 |
| Dynamic | 7.04 |
| Static | 8.5 |
| Load limit | 1 |
| Limiting speed | 6000 |
| Mass | 0.067 |
| D1 | 22 |
| r1,2 | 0.6 |
| C | 13.8 |
| r3,4 | 0.3 |
| E | – |
| F | 16 |
| Fr max | 11.6 |
| F0r max | 16.6 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Support rollers without flange rings, with an inner ring
| Parameter | Value |
|---|---|
| d | 12 |
| D | 32 |
| B | 14 |
| Dynamic | 7.04 |
| Static | 8.5 |
| Load limit | 1 |
| Limiting speed | 6000 |
| Mass | 0.067 |
| D1 | 22 |
| r1,2 | 0.6 |
| C | 13.8 |
| r3,4 | 0.3 |
| E | – |
| F | 16 |
| Fr max | 11.6 |
| F0r max | 16.6 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NA 2201.2RS.