Needle roller bearings with machined rings with flanges, with an inner ring · Designation: NA 4907.2RS
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 35 |
| D | 55 |
| B | 21 |
| Dynamic | 27 |
| Static | 43 |
| Load limit | 5.3 |
| Reference speed | – |
| Limiting speed | 4800 |
| Mass | 0.18 |
| r1,2 | 0.6 |
| da min | 39 |
| Da max | 51 |
| ra max | 0.6 |
| C | 20 |
| F | 42 |
| s max | 0.5 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Needle roller bearings with machined rings with flanges, with an inner ring
| Parameter | Value |
|---|---|
| d | 35 |
| D | 55 |
| B | 21 |
| Dynamic | 27 |
| Static | 43 |
| Load limit | 5.3 |
| Reference speed | – |
| Limiting speed | 4800 |
| Mass | 0.18 |
| r1,2 | 0.6 |
| da min | 39 |
| Da max | 51 |
| ra max | 0.6 |
| C | 20 |
| F | 42 |
| s max | 0.5 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NA 4907.2RS.