Needle roller bearings with machined rings with flanges, without an inner ring · Designation: NK 100/26
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 120 |
| Dynamic | 76.5 |
| Static | 156 |
| Load limit | 19.6 |
| Reference speed | 4000 |
| Limiting speed | 4500 |
| Mass | 0.52 |
| r1,2 | 1 |
| Da max | 115 |
| ra max | 1 |
| C | 26 |
| Fw | 100 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | 100x120x10 HMS5 RG |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Needle roller bearings with machined rings with flanges, without an inner ring
| Parameter | Value |
|---|---|
| D | 120 |
| Dynamic | 76.5 |
| Static | 156 |
| Load limit | 19.6 |
| Reference speed | 4000 |
| Limiting speed | 4500 |
| Mass | 0.52 |
| r1,2 | 1 |
| Da max | 115 |
| ra max | 1 |
| C | 26 |
| Fw | 100 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | 100x120x10 HMS5 RG |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NK 100/26.