Stainless steel deep groove ball bearings · Designation: W 6004-2Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 20 |
| D | 42 |
| B | 12 |
| Dynamic | 8.06 |
| Static | 5 |
| Load limit | 0.212 |
| Reference speed | 38000 |
| Limiting speed | 19000 |
| Mass | 0.0645 |
| d1 | 27.6 |
| d2 | – |
| D1 | – |
| D2 | 38.8 |
| r1,2 | 0.6 |
| da min | 24 |
| da max | 27.5 |
| Da max | 39.5 |
| ra max | 0.6 |
| kr | 0.03 |
| f0 | 14 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 20 |
| D | 42 |
| B | 12 |
| Dynamic | 8.06 |
| Static | 5 |
| Load limit | 0.212 |
| Reference speed | 38000 |
| Limiting speed | 19000 |
| Mass | 0.0645 |
| d1 | 27.6 |
| d2 | – |
| D1 | – |
| D2 | 38.8 |
| r1,2 | 0.6 |
| da min | 24 |
| da max | 27.5 |
| Da max | 39.5 |
| ra max | 0.6 |
| kr | 0.03 |
| f0 | 14 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 6004-2Z.