Stainless steel deep groove ball bearings · Designation: W 6010-2Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 16 |
| Dynamic | 19 |
| Static | 16.6 |
| Load limit | 0.71 |
| Reference speed | 18000 |
| Limiting speed | 9000 |
| Mass | 0.256 |
| d1 | 60 |
| d2 | – |
| D1 | – |
| D2 | 74.6 |
| r1,2 | 1 |
| da min | 55 |
| da max | 59 |
| Da max | 75 |
| ra max | 1 |
| kr | 0.03 |
| f0 | 16 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 50 |
| D | 80 |
| B | 16 |
| Dynamic | 19 |
| Static | 16.6 |
| Load limit | 0.71 |
| Reference speed | 18000 |
| Limiting speed | 9000 |
| Mass | 0.256 |
| d1 | 60 |
| d2 | – |
| D1 | – |
| D2 | 74.6 |
| r1,2 | 1 |
| da min | 55 |
| da max | 59 |
| Da max | 75 |
| ra max | 1 |
| kr | 0.03 |
| f0 | 16 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 6010-2Z.