Stainless steel deep groove ball bearings · Designation: W 6301-2RS1
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 12 |
| D | 37 |
| B | 12 |
| Dynamic | 8.32 |
| Static | 4.15 |
| Load limit | 0.176 |
| Reference speed | – |
| Limiting speed | 14000 |
| Mass | 0.0585 |
| d1 | 19.3 |
| d2 | – |
| D1 | – |
| D2 | 32 |
| r1,2 | 1 |
| da min | 17 |
| da max | 19 |
| Da max | 32.5 |
| ra max | 1 |
| kr | 0.035 |
| f0 | 11 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 12 |
| D | 37 |
| B | 12 |
| Dynamic | 8.32 |
| Static | 4.15 |
| Load limit | 0.176 |
| Reference speed | – |
| Limiting speed | 14000 |
| Mass | 0.0585 |
| d1 | 19.3 |
| d2 | – |
| D1 | – |
| D2 | 32 |
| r1,2 | 1 |
| da min | 17 |
| da max | 19 |
| Da max | 32.5 |
| ra max | 1 |
| kr | 0.035 |
| f0 | 11 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 6301-2RS1.