Self-aligning ball bearings with an extended inner ring · Designation: 11208 TN9
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 40 |
| D | 80 |
| B | 56 |
| Dynamic | 19 |
| Static | 6.55 |
| Load limit | 0.335 |
| Limiting speed | 5000 |
| Mass | 0.72 |
| d1 | 54 |
| D1 | 67.5 |
| r1,2 | 1.1 |
| Da max | 73 |
| ra max | 1.1 |
| kr | 0.04 |
| C | 18 |
| e | 0.22 |
| Y1 | 2.9 |
| Y2 | 4.5 |
| Y0 | 2.8 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Self-aligning ball bearings with an extended inner ring
| Parameter | Value |
|---|---|
| d | 40 |
| D | 80 |
| B | 56 |
| Dynamic | 19 |
| Static | 6.55 |
| Load limit | 0.335 |
| Limiting speed | 5000 |
| Mass | 0.72 |
| d1 | 54 |
| D1 | 67.5 |
| r1,2 | 1.1 |
| Da max | 73 |
| ra max | 1.1 |
| kr | 0.04 |
| C | 18 |
| e | 0.22 |
| Y1 | 2.9 |
| Y2 | 4.5 |
| Y0 | 2.8 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: 11208 TN9.