Drawn cup needle roller bearings · Designation: HK 2516.2RS
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 32 |
| Dynamic | 10.5 |
| Static | 15.3 |
| Load limit | 1.76 |
| Reference speed | – |
| Limiting speed | 6700 |
| Mass | 0.027 |
| C | 16 |
| Fw | 25 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| r min | 0.8 |
| Inner ring IR | IR 20x25x17 |
| Inner ring LR | LR 20x25x16 5 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Drawn cup needle roller bearings
| Parameter | Value |
|---|---|
| D | 32 |
| Dynamic | 10.5 |
| Static | 15.3 |
| Load limit | 1.76 |
| Reference speed | – |
| Limiting speed | 6700 |
| Mass | 0.027 |
| C | 16 |
| Fw | 25 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| r min | 0.8 |
| Inner ring IR | IR 20x25x17 |
| Inner ring LR | LR 20x25x16 5 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: HK 2516.2RS.