Drawn cup needle roller bearings · Designation: HK 3512
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 42 |
| Dynamic | 12.5 |
| Static | 21.6 |
| Load limit | 2.45 |
| Reference speed | 7000 |
| Limiting speed | 8000 |
| Mass | 0.027 |
| C | 12 |
| Fw | 35 |
| Radial shaft seal | G 35x42x4 |
| Radial shaft seal#2 | SD 35x42x4 |
| r min | 0.8 |
| Inner ring IR | – |
| Inner ring LR | LR 30x35x12 5 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Drawn cup needle roller bearings
| Parameter | Value |
|---|---|
| D | 42 |
| Dynamic | 12.5 |
| Static | 21.6 |
| Load limit | 2.45 |
| Reference speed | 7000 |
| Limiting speed | 8000 |
| Mass | 0.027 |
| C | 12 |
| Fw | 35 |
| Radial shaft seal | G 35x42x4 |
| Radial shaft seal#2 | SD 35x42x4 |
| r min | 0.8 |
| Inner ring IR | – |
| Inner ring LR | LR 30x35x12 5 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: HK 3512.