Drawn cup needle roller bearings · Designation: HK 5025
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 58 |
| Dynamic | 36.9 |
| Static | 85 |
| Load limit | 10.6 |
| Reference speed | 5000 |
| Limiting speed | 5600 |
| Mass | 0.085 |
| C | 25 |
| Fw | 50 |
| Radial shaft seal | G 50x58x4 |
| Radial shaft seal#2 | SD 50x58x4 |
| r min | 0.8 |
| Inner ring IR | IR 45x50x25 5 |
| Inner ring LR | LR 45x50x25 5 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Drawn cup needle roller bearings
| Parameter | Value |
|---|---|
| D | 58 |
| Dynamic | 36.9 |
| Static | 85 |
| Load limit | 10.6 |
| Reference speed | 5000 |
| Limiting speed | 5600 |
| Mass | 0.085 |
| C | 25 |
| Fw | 50 |
| Radial shaft seal | G 50x58x4 |
| Radial shaft seal#2 | SD 50x58x4 |
| r min | 0.8 |
| Inner ring IR | IR 45x50x25 5 |
| Inner ring LR | LR 45x50x25 5 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: HK 5025.