Needle roller bearings with machined rings with flanges, without an inner ring · Designation: NK 29/30
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 38 |
| Dynamic | 31.9 |
| Static | 60 |
| Load limit | 7.5 |
| Reference speed | 14000 |
| Limiting speed | 15000 |
| Mass | 0.084 |
| r1,2 | 0.3 |
| Da max | 36 |
| ra max | 0.3 |
| C | 30 |
| Fw | 29 |
| Radial shaft seal | G 29x38x4 |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | – |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Needle roller bearings with machined rings with flanges, without an inner ring
| Parameter | Value |
|---|---|
| D | 38 |
| Dynamic | 31.9 |
| Static | 60 |
| Load limit | 7.5 |
| Reference speed | 14000 |
| Limiting speed | 15000 |
| Mass | 0.084 |
| r1,2 | 0.3 |
| Da max | 36 |
| ra max | 0.3 |
| C | 30 |
| Fw | 29 |
| Radial shaft seal | G 29x38x4 |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | – |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NK 29/30.