Needle roller bearings with machined rings with flanges, without an inner ring · Designation: NK 38/20
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 48 |
| Dynamic | 25.5 |
| Static | 49 |
| Load limit | 6.1 |
| Reference speed | 11000 |
| Limiting speed | 12000 |
| Mass | 0.079 |
| r1,2 | 0.3 |
| Da max | 46 |
| ra max | 0.3 |
| C | 20 |
| Fw | 38 |
| Radial shaft seal | G 38x48x4 |
| Radial shaft seal#2 | SD 38x48x4 |
| Spring loaded lip seal | – |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Needle roller bearings with machined rings with flanges, without an inner ring
| Parameter | Value |
|---|---|
| D | 48 |
| Dynamic | 25.5 |
| Static | 49 |
| Load limit | 6.1 |
| Reference speed | 11000 |
| Limiting speed | 12000 |
| Mass | 0.079 |
| r1,2 | 0.3 |
| Da max | 46 |
| ra max | 0.3 |
| C | 20 |
| Fw | 38 |
| Radial shaft seal | G 38x48x4 |
| Radial shaft seal#2 | SD 38x48x4 |
| Spring loaded lip seal | – |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NK 38/20.