Needle roller bearings with machined rings with flanges, without an inner ring · Designation: NK 70/25
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| D | 85 |
| Dynamic | 44.6 |
| Static | 98 |
| Load limit | 12.2 |
| Reference speed | 6000 |
| Limiting speed | 6700 |
| Mass | 0.26 |
| r1,2 | 0.6 |
| Da max | 81 |
| ra max | 0.6 |
| C | 25 |
| Fw | 70 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | 70x85x8 HMS5 RG |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Needle roller bearings with machined rings with flanges, without an inner ring
| Parameter | Value |
|---|---|
| D | 85 |
| Dynamic | 44.6 |
| Static | 98 |
| Load limit | 12.2 |
| Reference speed | 6000 |
| Limiting speed | 6700 |
| Mass | 0.26 |
| r1,2 | 0.6 |
| Da max | 81 |
| ra max | 0.6 |
| C | 25 |
| Fw | 70 |
| Radial shaft seal | – |
| Radial shaft seal#2 | – |
| Spring loaded lip seal | 70x85x8 HMS5 RG |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: NK 70/25.