Alignment needle roller bearings, with an inner ring · Designation: PNA 15/32
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 15 |
| D | 32 |
| B | 16 |
| Dynamic | 12.8 |
| Static | 17.6 |
| Load limit | 2.12 |
| Reference speed | 22000 |
| Limiting speed | 24000 |
| Mass | 0.062 |
| D1 | 27 |
| r1,2 | 0.3 |
| da min | 17 |
| Da max | 27 |
| ra max | 0.8 |
| rb max | 0.3 |
| Da min | 26 |
| r min | 0.8 |
| F | 18 |
| s max | 0.5 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Alignment needle roller bearings, with an inner ring
| Parameter | Value |
|---|---|
| d | 15 |
| D | 32 |
| B | 16 |
| Dynamic | 12.8 |
| Static | 17.6 |
| Load limit | 2.12 |
| Reference speed | 22000 |
| Limiting speed | 24000 |
| Mass | 0.062 |
| D1 | 27 |
| r1,2 | 0.3 |
| da min | 17 |
| Da max | 27 |
| ra max | 0.8 |
| rb max | 0.3 |
| Da min | 26 |
| r min | 0.8 |
| F | 18 |
| s max | 0.5 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: PNA 15/32.