Stainless steel deep groove ball bearings · Designation: W 604-2Z
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 4 |
| D | 12 |
| B | 4 |
| Dynamic | 0.54 |
| Static | 0.176 |
| Load limit | 0.008 |
| Reference speed | 130000 |
| Limiting speed | 63000 |
| Mass | 0.00215 |
| d1 | – |
| d2 | 5.6 |
| D1 | – |
| D2 | 9.9 |
| r1,2 | 0.2 |
| da min | 5.3 |
| da max | 5.5 |
| Da max | 10.4 |
| ra max | 0.2 |
| kr | 0.03 |
| f0 | 6.4 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 4 |
| D | 12 |
| B | 4 |
| Dynamic | 0.54 |
| Static | 0.176 |
| Load limit | 0.008 |
| Reference speed | 130000 |
| Limiting speed | 63000 |
| Mass | 0.00215 |
| d1 | – |
| d2 | 5.6 |
| D1 | – |
| D2 | 9.9 |
| r1,2 | 0.2 |
| da min | 5.3 |
| da max | 5.5 |
| Da max | 10.4 |
| ra max | 0.2 |
| kr | 0.03 |
| f0 | 6.4 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 604-2Z.