Stainless steel deep groove ball bearings · Designation: W 618/1
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 1 |
| D | 3 |
| B | 1 |
| Dynamic | 0.052 |
| Static | 0.012 |
| Load limit | 0.001 |
| Reference speed | 240000 |
| Limiting speed | 150000 |
| Mass | 3e-05 |
| d1 | 1.5 |
| d2 | – |
| D1 | 2.5 |
| D2 | – |
| r1,2 | 0.05 |
| da min | 1.4 |
| da max | – |
| Da max | 2.6 |
| ra max | 0.05 |
| kr | 0.02 |
| f0 | 5.6 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 1 |
| D | 3 |
| B | 1 |
| Dynamic | 0.052 |
| Static | 0.012 |
| Load limit | 0.001 |
| Reference speed | 240000 |
| Limiting speed | 150000 |
| Mass | 3e-05 |
| d1 | 1.5 |
| d2 | – |
| D1 | 2.5 |
| D2 | – |
| r1,2 | 0.05 |
| da min | 1.4 |
| da max | – |
| Da max | 2.6 |
| ra max | 0.05 |
| kr | 0.02 |
| f0 | 5.6 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 618/1.