Stainless steel deep groove ball bearings · Designation: W 618/1.5
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 1.5 |
| D | 4 |
| B | 1.2 |
| Dynamic | 0.062 |
| Static | 0.016 |
| Load limit | 0.001 |
| Reference speed | 220000 |
| Limiting speed | 140000 |
| Mass | 0.0001 |
| d1 | 2.1 |
| d2 | – |
| D1 | 3.1 |
| D2 | – |
| r1,2 | 0.05 |
| da min | 2 |
| da max | – |
| Da max | 3.6 |
| ra max | 0.05 |
| kr | 0.02 |
| f0 | 6.4 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 1.5 |
| D | 4 |
| B | 1.2 |
| Dynamic | 0.062 |
| Static | 0.016 |
| Load limit | 0.001 |
| Reference speed | 220000 |
| Limiting speed | 140000 |
| Mass | 0.0001 |
| d1 | 2.1 |
| d2 | – |
| D1 | 3.1 |
| D2 | – |
| r1,2 | 0.05 |
| da min | 2 |
| da max | – |
| Da max | 3.6 |
| ra max | 0.05 |
| kr | 0.02 |
| f0 | 6.4 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 618/1.5.