Stainless steel deep groove ball bearings · Designation: W 6307-2RS1
Parameters as recorded in the source. Missing values are shown as a dash.
| Parameter | Value |
|---|---|
| d | 35 |
| D | 80 |
| B | 21 |
| Dynamic | 28.6 |
| Static | 19 |
| Load limit | 0.815 |
| Reference speed | – |
| Limiting speed | 5600 |
| Mass | 0.441 |
| d1 | – |
| d2 | 46.7 |
| D1 | – |
| D2 | 71.6 |
| r1,2 | 1.5 |
| da min | 43 |
| da max | 46.5 |
| Da max | 73 |
| ra max | 1.5 |
| kr | 0.035 |
| f0 | 13 |
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Stainless steel deep groove ball bearings
| Parameter | Value |
|---|---|
| d | 35 |
| D | 80 |
| B | 21 |
| Dynamic | 28.6 |
| Static | 19 |
| Load limit | 0.815 |
| Reference speed | – |
| Limiting speed | 5600 |
| Mass | 0.441 |
| d1 | – |
| d2 | 46.7 |
| D1 | – |
| D2 | 71.6 |
| r1,2 | 1.5 |
| da min | 43 |
| da max | 46.5 |
| Da max | 73 |
| ra max | 1.5 |
| kr | 0.035 |
| f0 | 13 |
Parameters as recorded in the source. A missing value is shown as a dash.
A dimensional match does not confirm suitability for a specific application. Execution and operating conditions should be confirmed during selection.
Designation: W 6307-2RS1.